Heat Transfer Kit: 1-1 Room Basic Kit
$209.00
This Heat Transfer Kit is designed to transfer warm (or cold) air from one room to another in your home. It includes an Axial Inline fan. These heat transfer kits can be a great energy and cost saving solution when you have a room that contains a heat source such as a heater or open fire, that produces excess heat. This excess heat can then be utalised by spreading to other rooms to avoid waste. Great for winter to take the chill out of the air.
This kit is for DIY installation unless you choose to add hardwired accessories (eg thermostat) which will need to be installed by an electrician.
| Power Consumption (W) | 16w |
| Fan Capacity: | 358 m3/hr (99 l/s) |
| Noise level at 3m ([dBA]) | 44dBA |
| Ductable: | Yes (150mm duct diameter) |
Save
Save
Features of this Heat Transfer Kit
- Comes with everything you need to install
- Features a small and compact 150mm axial inline motor.
- Suitable for 1-1 room heat transfer for a duct run of 6m or less.
Kit Includes:
- 1 x VKO 150 inline fan with lead and plug (Includes lead & plug & is for DIY installation unless you choose to add hardwired accessories (eg speed control) which will need to be installed by an electrician)
- 2 x Internal cone vents 150mm
- 1 x 6m Insulated R1.0 Duct 150mm
- 1 x Roll of Duct tape
- 1 x Roll of Hanging tape
Heat Transfer Kit Information
These heat transfer kits can be DIY installed as it is relatively easy, however some handyman skills are required such as to make holes in plaster etc. If you are not comfortable or familiar with this you may want to get a professional to install the kit for you. An electrician is needed to provide you with power to the inline fan (or provide you with a power point) and switch. If you are intending to install a thermostat, you will also require an electrician. The fan comes with a lead and plug included, therefore it can be plugged into an available power point which an electrician could install independent of the system installation.
Download VKO Spec Sheet
| Model Number | EHUFDHK1 |
|---|---|
| Brand | Fanco |
| Colour | White |
| Material | Plastic |
| Installation | Comes With Lead & Plug, Installing in conjunction with optional accessories may require hardwiring. |
| Capacity m3/hr | 358 m3/hr |
| Capacity l/s | 99 l/s |
| Motor Wattage | 29w |
| Noise | 44 dB(A) |
| Voltage | 230 |
| Current | 0.13A |
| IP Rating | IPX4 |
| Ductable | Yes |
| Duct Size | 150mm |
| Warranty | Fanco: The manufacturer offers a 2 year replacement warranty (conditions apply). |
| Exhaust Disclaimer | Capacity: All capacity figures and technical data is quoted and provided by the fan's manufacturer. Capacity is based on the unit free of ducting., Ductable Fans: If you are ducting this product it is advisable to keep the duct run as short, straight and tight as possible., Installation: All electrical products must be installed by a licensed and qualified electrician unless it is a DIY product (i.e with a lead & plug installed) |
Fan Performance
Performance Comparison Between Sizes
| Variable | m3/hr | l/s | RPM (min-1) | Wattage | dB(A) at 3m |
|---|---|---|---|---|---|
| VKO 100 | 135m3/hr | 37l/s | 2300 | 16w | 38dB(A) |
| VKO 125 | 243m3/hr | 67l/s | 2400 | 24W | 39dB(A) |
| VKO 150 | 358m3/hr | 99l/s | 2400 | 29w | 44dB(A) |
Pressure Curve
Fan Dimensions
Dimensions
| Dimensions | Measurement (mm) |
|---|---|
| ∅D | 150mm |
| ∅d | 59mm |
| B | 200mm |
| B1 | 184mm |
| H | 162mm |
| L | 100mm |
| L1 | 28mm |
| L2 | 45mm |
| L3 | 29mm |
FAQ
How do we calculate which room size this kit is suitable for?
The recommended room size is based on achieving 15 air changes per hour. To calculate the size of your room simply multiply length x width x height as shown in the diagram above.
What Capacity Will I Need?
See our Exhaust Fan Capacity Calculator
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.