HCM Window / Wall Exhaust Fan – 180mm (White)
$389.00
The HCM Exhaust fan is suitable for both wall and window applications including home kitchens, bathrooms, small offices and other small spaces.
| Installation Location: | Wall / Window |
| Fan Capacity: | 380 m3/hr (105.55 l/s) |
| Hole (Cutout) Size: | 220mm-225mm Round |
| Face Size: | 255mm Round |
| Ductable: | No |
Features of the HCM Exhaust Fan
- Low profile design
- Suitable for glass thicknesses up to 8mm
- Weather and impact resistant plastic housing
- Integrated gravity operated shutters (on rear of unit)
- Quiet operation
- Powerful airflow
- Rated for continuous running
- Requires Hardwiring
HCM Exhaust Fan Further Information
These HCM exhaust fans feature a low profile design and have weather and impact resistant plastic housings with integral air operated shutters. It’s impellers are sickle shaped for high performance and the motor is a shaded-pole induction motor with sleeve bearings.
Important Notice: If you are wanting to install this HCM on a wall thicker than 25mm, you will need to purchase a set of wall rods and a wall tube as an accessory. These products are listed below as accessories.
| Model Number | HCM180 |
|---|---|
| Brand | Fantech |
| Colour | White |
| Material | Plastic |
| Installation Location | Wall, Window |
| Installation | Requires Hardwiring |
| Capacity m3/hr | 380 m3/hr |
| Capacity l/s | 105.55 l/s |
| Motor Wattage | 25w |
| Noise | 35.6 dB(A) |
| Voltage | 220 – 240 |
| Current | No Data Available |
| IP Rating | IPX4 |
| Hole Size Range | 220mm – 225mm |
| Hole Shape | Round |
| Fascia Shape | Round |
| Space to Install Wall | Can be installed in a window or wall with a depth of up to 25mm. If depth is over 25mm (up to 300mm), can use the rod and tube accessories (see below). |
| Ductable | No |
| backdraft-shutter | Yes |
| Warranty | Fantech HCM: The manufacturer offers a 1 year replacement warranty (conditions apply) |
| Exhaust Disclaimer | Capacity: All capacity figures and technical data is quoted and provided by the fan's manufacturer. Capacity is based on the unit free of ducting., Installation: All electrical products must be installed by a licensed and qualified electrician unless it is a DIY product (i.e with a lead & plug installed) |
Installation
Can be installed in a window or wall with a depth of up to 25mm.
Installation On Walls
For the HCM 180 it will need a cut out diameter of within 220mm – 225mm in the wall.
If depth is over 25mm (up to 300mm), can use the rod and tube (see accessories).
Installation On Windows
For the HCM 180 it will need a cut out diameter of within 220mm – 225mm in the window (thickness 3-6mm).
Dimensions
Dimensions
| Dimensions | Measurement (mm) |
|---|---|
| A | 255mm |
| B | 205mm |
| C | 85mm |
| D | 112mm |
| E | 35mm |
| F | 122mm |
FAQ
What Capacity Will I Need?
See our Exhaust Fan Capacity Calculator
Performance
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.