Original price was: $365.00.$315.00Current price is: $315.00.
The HCM Exhaust fan is suitable for both wall and window applications including home kitchens, bathrooms, small offices and other small spaces.
| Installation Location: | Wall / Window |
| Fan Capacity: | 210 m3/hr (58 l/s) |
| Hole (Cutout) Size: | 183mm – 188mm Round |
| Face Size: | 214mm Round |
| Ductable: | No |
These HCM exhaust fans feature a low profile design and have weather and impact resistant plastic housings with integral air operated shutters. It’s impellers are sickle shaped for high performance and the motor is a shaded-pole induction motor with sleeve bearings.
Important Notice: If you are wanting to install this HCM on a wall thicker than 25mm, you will need to purchase a set of wall rods and a wall tube as an accessory. These products are listed below as accessories.
| Model Number |
HCM150 |
|---|---|
| Brand |
Fantech |
| Colour |
White |
| Material |
Plastic |
| Installation Location |
Wall ,Window |
| Installation |
Requires Hardwiring |
| Capacity m3/hr |
210 m3/hr |
| Capacity l/s |
58 l/s |
| Motor Wattage |
25w |
| Noise |
35.6 dB(A) |
| Voltage |
220 – 240 |
| Current |
No Data Available |
| IP Rating |
IPX4 |
| Hole Size Range |
183mm – 188mm |
| Hole Shape |
Round |
| Fascia Shape |
Round |
| Space to Install Wall |
Can be installed in a window or wall with a depth of up to 25mm. If depth is over 25mm (up to 300mm), can use the rod and tube accessories (see below). |
| Ductable |
No |
| backdraft-shutter |
Yes |
| Warranty |
Fantech HCM: The manufacturer offers a 1 year replacement warranty (conditions apply) |
| Exhaust Disclaimer |
Capacity: All capacity figures and technical data is quoted and provided by the fan's manufacturer. Capacity is based on the unit free of ducting. ,Installation: All electrical products must be installed by a licensed and qualified electrician unless it is a DIY product (i.e with a lead & plug installed) |
Can be installed in a window or wall with a depth of up to 25mm.
For the HCM 150 it will need a cut out diameter of within 183mm – 188mm in the wall.
If depth is over 25mm (up to 300mm), can use the rod and tube (see accessories).
For the HCM 150 it will need a cut out diameter of within 183mm – 188mm in the window (thickness 3-6mm).
| Dimensions | Measurement (mm) |
|---|---|
| A | 214mm |
| B | 174mm |
| C | 60mm |
| D | 88mm |
| E | 35mm |
| F | 98mm |
What Capacity Will I Need?
See our Exhaust Fan Capacity Calculator
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.